Using cd, Connecting a cd drive (sold separately), Installing the cd drive holder (sold separately) – Roland DP-990 User Manual
Page 23: Nstalling the cd drive holder (sold separately)
23
Before You Play
By connecting a commercially available CD drive that is USB-
compatible, you can use the DP-990 to play back ordinary
music CDs or songs from a CD-ROM that contains SMF music
files (p. 42).
The DP-990 provides a range of performance possibilities,
such as a “Center Cancel” function, which minimizes the vocal
portion of commercially available CDs so that you can sing the
vocal yourself (p. 50), and a “Melody Guide” function, which
mutes the melody portion of SMF music files so that you can
play it yourself (p. 46).
* You can also play songs on VIMA CD-ROMs (VIMA TUNES) sold
by Roland.
Precautions Concerning Use of the CD
• You cannot play back CD-R/RW disks to which audio
tracks have been added or CDs containing both audio
tracks and data (CD Extra).
• The DP-990 is capable of playing back only commercial
CDs that conform the official standards—those that carry
the “COMPACT DISC DIGITAL AUDIO” logo.
• The usability and sound quality of audio discs that
incorporate copyright protection technology and other
non-standard CDs cannot be guaranteed.
• For more detailed information on audio discs featuring
copyright protection technology and other non-standard
CDs, please consult the disc vendor.
• You cannot save songs to CDs, and you cannot delete
songs recorded to CDs. Furthermore, you cannot format
CDs.
Use a CD drive sold by Roland or one that has been
verified by Roland to work with the DP-990.
We cannot guarantee operation if any other USB
device is connected.
A list of the CD drives that have been tested and
found to be compatible is available on the Roland
website.
http://www.roland.com/
* The DP-990 does not support CD drives that are powered by the
USB bus. If you use a USB-bus-powered CD drive, you must use
the power supply included with the CD drive so that the drive will
operate under its own power.
1.
Switch off the power to the DP-990 and the CD
drive to be connected.
2.
Connect the USB cable included with the CD
drive to the External Memory connector on the
DP-990.
When connecting a CD drive, verify that the plug is
oriented correctly for the external memory connector,
and firmly insert it all the way into the connector.
3.
Turn on the power to the connected CD drive.
4.
Turn on the power to this instrument.
For details on installing a CD drive sold by Roland,
refer to the owner's manual for your CD drive.
For information on how to perform the following CD-
drive operations, refer to the owner’s manual for the
drive.
• Switching the power on and off
• Inserting and ejecting a CD
Attach the CD drive holder as shown the figure, using
the mounting holes on the DP-990’s bottom panel.
CD drives of the following sizes cannot be attached
to the piano using the CD drive holder. You will
need to place such drives on a table or other
surface.
• Width greater than 150 mm (5-15/16 inches)
• Depth greater than 170 mm (6-3/4 inches)
• Thickness (height) greater than 25 mm (1 inches)
Using CD
NOTE
Connecting a CD Drive (sold separately)
I
nstalling the CD Drive Holder (sold
separately)
USB Cable
CD Drive
(Sold Separately)
NOTE
NOTE
NOTE
DP-990_e.book 23 ページ 2009年2月17日 火曜日 午前8時30分