Roland DP-990 - Manual (Page 39)

39
Performing
You can perform while the metronome sounds.
DP-990 provides a versatile Metronome function. You can adjust the volume or beat of
the metronome.
If a song is playing, the metronome will sound at the tempo and beat of that song.
fig.Panel-Metronome-e.eps
1.
Press the [Metronome] button so it’s lit.
The metronome will be heard.
The [Metronome] button flashes in red and green in time with the beat selected at that time.
The indicator lights in red on the downbeats, and in green on weak beats.
If you don’t perform any operation for a while, the indication in the display will change
to the following.
You can change the sound of the metronome ( p. 73 ).
Stopping the Metronome Function
1.
Press the [Metronome] button.
1.
Press the [Tempo/Beat] button to make the “Tempo” indicator light.
The tempo is displayed.
fig.d-108.eps
2.
Press the [-] or [+] button to adjust the tempo.
Correspondence between beat and tempo display
Performing with the Metronome
Changing the Tempo
2/2
=5–250
6/8, 9/8, 12/8
= 7–333
3/8
=20–999
x/4
=10–500
Beat
Tempo Value
DP-990_e.book 39 ページ ２００９年２月１７日 火曜日 午前８時３０分