Roland DP-990 - Manual (Page 27)

27
Performing
The DP-990 features over 300 different internal sounds, allowing you to enjoy
performing with sounds suitable for many different types of music.
These onboard sounds are called “Tones.” The Tones are divided into six different
groups, each of which is assigned to a different Tone button.
The Tone “Grand Piano 1” is selected when the instrument’s power is turned on.
fig.Panel-Tones-e.eps
1.
Press a Tone button to select a tone group.
You’ll hear the Tone assigned to Tone number 1 in the selected Tone Group. Try fingering the
keyboard.
The display will indicate the number of the currently selected tone.
fig.d-1.eps
2.
Use the [-] [+] buttons to select a sound from the tone group.
The Tone you’ve selected is heard when you finger the keyboard.
The next time you select this Tone button, you’ll hear the tone you selected here.
fig.d-5.eps
If you don’t perform any operation for a while, the indication in the display will change
to the following.
About the Tone, refer to “Tone List” (p. 90).
For some sounds, there are keys that do not produce sound.
Performing with a Variety of Sounds
NOTE
Disabling the panel buttons
By using the Panel Lock function you can disable all of the buttons. This allows you to prevent unintended changes in
the settings during a performance. For details, refer to “Disabling the Buttons (Panel Lock)” (p. 81).
DP-990_e.book 27 ページ ２００９年２月１７日 火曜日 午前８時３０分