Roland DP-990 - Manual (Page 67)

67
Various Settings
This specifies how 3D Sound Control (p. 29) will be applied.
1.
Hold down the [Brilliance] button and press
the [3D] button.
The display will indicate “Fnc” and you’ll be in Function
mode.
2. Press the [Reverb] button.
The display will indicate “3d” and then the value of the
setting will appear.
3. Use the [-] [+] buttons to change the setting.
[Int Song]
(&[-][+])
Save a Song
p. 62
Deleting a Song
p. 64
Initializing the Memory
p. 60
[Accomp]
(&[-][+])
Accomp Track
p. 74
Local Control
p. 75
MIDI Transmit Channel
p. 76
Composer MIDI Out
p. 76
V-LINK
p. 77
External Memory Mode
p. 78
Master Gain
p. 78
Track Assign
p. 79
Recommended Tone
p. 79
[Left]
Memory Backup
p. 80
[Right]
Factory Reset
p. 80
[Key Touch]
Hammer Response
p. 68
[Brilliance] +
[Key Touch]
Panel Lock
p. 81
Button Function Page
Changing How Grand Space is
Applied (3D Mode)
Setting Explanation
Auto
When the headphones are connected, the depth
effect is optimized for headphones, and when no
headphones are connected, the optimal depth for
speakers is applied.
Speaker
The optimal depth for speakers is used,
regardless of whether or not headphones are
connected.
Grand Space is also applied to the sound output
from the Output connectors, making this
convenient when you want to play through
speakers connected to the Output connectors.
Headphones
The optimal depth for headphones is used,
regardless of whether or not headphones are
connected.
DP-990_e.book 67 ページ ２００９年２月１７日 火曜日 午前８時３０分