Roland DP-990 - Manual (Page 56)

56
Recording
9.
Press the [ ] button.
After two measures of count sound, recording begins.
Recording starts when you start playing the keyboard (without pressing the [
] button). In this
case, a count is not sounded.
When recording begins, the [
] button and [ ] button will light.
During the count-in, the count measure is indicated in the display as “-2” then “-1.”
If you record additional parts without erasing the previously recorded song, the song
tempo and time signature will remain as it was when the song was first recorded.
10.
To stop recording, press the [ ] button.
Listening to the Recorded Performance
If the “Int Song” indicator is not lit, press the [Int Song/Ext Song] button.
11.
Press the [ ] button.
You will return to the beginning of the recorded performance.
12.
Press the [ ] button.
The recorded performance will play back.
13.
When you press the [ ] button once again, playback will stop.
You can hold down one of the track buttons and press the [ ] button to erase the
performance of only that track. At this time, the display will indicate “USr.” If you erase
the performance from all tracks, the display will indicate “USr.”
The recorded performance will disappear when you turn off the power. If you want to
keep the performance you recorded, you must save it in internal memory or USB
memory. Refer to “Saving the Songs” (p. 62).
If you have not saved the performance you recorded, you won’t be able to play back
another song. You’ll have to erase (p. 59) or save (p. 62) the performance before
playing back another song.
NOTE
NOTE
NOTE
DP-990_e.book 56 ページ ２００９年２月１７日 火曜日 午前８時３０分