Roland VG-99 - Manual (Page 95)

95
Chapter 8 Other Functions
Chapter 8
9. You can scroll through the list using [F3] and
[F4] or the F3 and F4 knobs.
10. Press [F5] (EXIT).
The list disappears from the screen.
11. Press [EXIT] several times to return to the Play
screen.
The VG-99 features a function called Internal Pedal system. This
function assigns specified parameters to a virtual expression pedal
(the internal pedal), providing an effect automatically that changes
volume and tone in real time just the way an expression pedal
functions.
The Internal Pedal system features the following two functions,
allowing you to set Source for each assign 1-16 of the Assign.
• Internal Pedal
• Wave Pedal
* When the Internal Pedal or the Wave Pedal is used, set the ASSIGN
SW MODE to MOMENT.
With the trigger you have set, the assumed expression pedal starts
working. If you have set INTERNAL PEDAL to SOURCE, set the
TRIGGR parameter (p. 156).
This changes the parameter selected as a target in a certain cycle with
the assumed expression pedal. When you have set WAVE PEDAL
for SOURCE, the RATE parameter (p. 156) and FORM parameter (p.
156) should be set.
Activating the Virtual
Expression Pedal at the
Start of Operations
(Internal Pedal System)
Internal Pedal
Wave Pedal
VG-99_e.book 95 ページ ２００７年７月５日 木曜日 午前９時２２分