Customizing the speaker, Customizing the overdrive/ distortion – Roland VG-99 User Manual
Page 40
40
Chapter 3 Creating Your Own Effect Types (CUSTOMIZE)
*
You cannot customize the speaker when BASS AMP VINTAGE or
BASS AMP MODERN is selected with PREAMP TYPE.
1.
Press [COSM AMP].
The COSM AMP Edit screen appears.
2.
Press PAGE [
] [
] to display the Speaker
Type selection screen.
3.
Select CUSTOM as the SP TYPE with [F1]
(SELECT) or the F1 knob.
4.
Press PAGE [
] to display the speaker
customization screen.
5.
Adjust the desired parameter with [F1]–[F5] or
with the F1–F5 knobs.
For detailed information on all the parameters, refer to
6.
If you want to save the edited settings,
perform the Write procedure (p. 38).
*
If not saving the settings, press [EXIT] to return to the Play screen.
1.
Press [FX].
The FX Edit screen appears.
2.
Press PAGE [
] to display Page 1.
3.
Press [F2] (OD/DS).
4.
Select CUSTOM as the OD/DS TYPE with [F2]
(SELECT) or the F2 knob.
5.
Press PAGE [
] to display Page 2.
6.
Select the basic type with [F1] (SELECT) or the
F1 knob.
7.
Adjust the desired parameter with [F1]–[F5] or
with the F1–F5 knobs.
If there are other parameters you want to adjust, press PAGE
[
].
8.
Repeat Steps 6 and 7 as needed.
For detailed information on all the parameters, refer to
“OD/DS (Overdrive/Distortion)”
9.
If you want to save the edited settings,
perform the Write procedure (p. 38).
*
If not saving the settings, press [EXIT] to return to the Play screen.
Customizing the Speaker
Customizing the Overdrive/
Distortion
VG-99_e.book 40 ページ ２００７年７月５日 木曜日 午前９時２２分