Roland VG-99 - Manual (Page 38)

38
Chapter 2 Creating Sounds
The settings made to change a sound are temporary; when you
switch to a different patch, the settings revert to the values in effect
before the changes were made.
If you want to save the changes in the settings, carry out the Write
procedure. If you do not want to save your changes, press EXIT to
return to the Play screen.
1. Press [WRITE].
The Write screen appears.
2. Rotate the PATCH/VALUE dial to select the
save-destination patch number.
3. To save the patch, press [WRITE].
“NOW WRITING...” is displayed while the patch is being
saved, and then the Play screen returns to the display.
* If you do not want to save, press [EXIT] to return to the Play screen.
Saving a Patch (WRITE)
VG-99_e.book 38 ページ ２００７年７月５日 木曜日 午前９時２２分