Customizing the preamp, Chapter 3 – Roland VG-99 User Manual
Page 39
39
Chapter 3
Chapter 3 Creating Your Own Effect
Types (CUSTOMIZE)
The Customize function allows you to make even more detailed
changes to settings for COSM AMP (Preamp section, Speaker
section), Overdrive/Distortion, and Pedal Wah, just like designing
your own original effects processors.
1.
Press [COSM AMP].
The COSM AMP Edit screen appears.
2.
Press PAGE [
] to display Page 1.
fig.01-060d
3.
Select CUSTOM as the PREAMP TYPE with
[F2] (SELECT) or the F2 knob.
fig.01-060d
4.
Press PAGE [
] to display Page 2.
5.
Select the basic preamp type to customize
with [F1] (SELECT) or the F1 knob.
6.
Press PAGE [
] to display Page 3.
7.
Adjust the desired parameter with [F1]–[F6] or
with the F1–F6 knobs.
If there are other parameters you want to adjust, press PAGE
[
].
8.
Repeat Steps 5–7 as needed.
For detailed information on all the parameters, refer to
9.
If you want to save the edited settings,
perform the Write procedure (p. 38).
*
If not saving the settings, press [EXIT] to return to the Play screen.
Customizing the Preamp
VG-99_e.book 39 ページ ２００７年７月５日 木曜日 午前９時２２分