Roland VG-99 - Manual (Page 147)

147
MIXER Chapter 9 Parameter Guide
Chapter 9
OUTPUT
This setting determines which signals are output at each output and
the level at which they are output.
* The parameters enabled (MAIN OUT, MAIN LEVEL, SUB OUT,
SUB LEVEL, D OUT, D OUT LEVEL) change according to the
settings in
“OUTPUT MODE” (p. 172) in the SYSTEM screen.
When disabled, the value < > is given.
Parameter/
Range
Explanation
MAIN OUT
This switches the signals output from the MAIN OUT.
CH A This outputs Channel A.
This output also reflects the mixer’s MIX
SW, PAN, LEVEL, and A/B BAL settings.
CH B This outputs Channel B.
This output also reflects the mixer’s MIX
SW, PAN, LEVEL, and A/B BAL settings.
MIXER (DRY) This outputs the post-A/B mix signals be-
fore application of DELAY/REVERB.
MIXER This outputs the post-A/B mix signals after
application of DELAY/REVERB and TO-
TAL EQ.
MAIN LEVEL
0–200 Adjusts the volume the output to the MAIN
OUT.
SUB OUT
This switches the signals output from the SUB OUT.
CH A This outputs Channel A.
This output also reflects the mixer’s MIX
SW, PAN, LEVEL, and A/B BAL settings.
CH B This outputs Channel B.
This output also reflects the mixer’s MIX
SW, PAN, LEVEL, and A/B BAL settings.
MIXER (DRY) This outputs the post-A/B mix signals be-
fore application of DELAY/REVERB.
MIXER This outputs the post-A/B mix signals after
application of DELAY/REVERB and TO-
TAL EQ.
SUB LEVEL
0–200 Adjusts the volume the output to the SUB
OUT.
Parameter/
Range
Explanation
D OUT (Digital Output)
This switches the signals output from the DIGITAL OUT.
COSM GTR A This outputs the sounds from COSM GTR A.
COSM GTR B This outputs the sounds from COSM GTR B.
NORMAL PU This outputs the sounds from the normal
pickup.
CH A This outputs Channel A.
This output also reflects the mixer’s MIX
SW, PAN, LEVEL, and A/B BAL settings.
CH B This outputs Channel B.
This output also reflects the mixer’s MIX
SW, PAN, LEVEL, and A/B BAL settings.
MIXER (DRY) This outputs the post-A/B mix signals be-
fore application of DELAY/REVERB.
MIXER This outputs the post-A/B mix signals after
application of DELAY/REVERB and TO-
TAL EQ.
MAIN OUT This outputs the same signals as those from
MAIN OUT.
SUB OUT This outputs the same signals as those from
SUB OUT.
D OUT LEVEL (Digital Output Level)
0–200 Adjusts the volume the output to theDIGI-
TAL OUT.
VG-99_e.book 147 ページ ２００７年７月５日 木曜日 午前９時２２分