Roland VG-99 - Manual (Page 44)

44
Chapter 4 Global Device Settings (SYSTEM)
On some guitars with the Divided pickup built in, the positions of
the DOWN/S1 and UP/S2 switches are reversed from those of the
Divided pickup. Set this so that the functions match.
1. Follow Steps 1–3 in “Selecting the Settings”
(p. 42) to display the GK SETTING screen.
2. Press PAGE [ ] [ ] to display Page 2.
3. Use [F6] (SELECT) or the F6 knob to select the
arrangement.
Set the clearance from the center of the Divided pickup to the
bridge’s saddle for each string.
* This setting is not required when piezo pickups are used.
1. Follow Steps 1–3 in “Selecting the Settings”
(p. 42) to display the GK SETTING screen.
2. Press PAGE [ ] [ ] to display Page 3.
3. Rotate the F1–F6 knobs to set the clearance
for strings 1–6.
Setting the DOWN/S1, UP/S2
Switch Arrangement
Settings Explanation
NORMAL The switches will not be reversed.
REVRSE
The DOWN/S1 switch and UP/S2 switch will
be reversed.
Setting the Gap Between the
Pickup and the Bridge (PICKUP
↔ BRIDGE)
Settings Explanation
10.0–30.0 mm
Specify the distance between the center
of the Divided pickup and the center of
each bridge saddle.
string 6 string 1
Bridge Pickup
String
VG-99_e.book 44 ページ ２００７年７月５日 木曜日 午前９時２２分