Nortel Networks P0857846 - Manual (Page 93)

80 / Communicating in the office
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02
Activating and deactivating the ability to page
You will need the programming template found at the front of this
guide. See Getting Started for more information.
1. Press ƒ••¤flfl‹›› .
2. Press ¤‹fl›fl (the default System Coordinator
password).
3. Press ≠ and enter the internal number of the telephone
you wish to program.
4. Press ≠ twice.
5. Press ‘ seven times. The display shows Paging .
6. Press CHANGE to select the setting: Y (Yes) or N (No).
Creating page zones
Each telephone can be assigned to one of six zones for receiving
pages.
You will need the programming template found at the front of this
guide. See Getting Started for more information.
1. Press ƒ••¤flfl‹›› .
2. Press ¤‹fl›fl (the default System Coordinator
password).
3. Press ≠ and enter the internal number of the telephone
you wish to program.
4. Press ≠ twice.
5. Press ‘ six times. The display shows Page Zone .
6. Press CHANGE to select the setting: 1 , 2 , 3 , 4 , 5 , 6 or None .
You can make a telephone part of a page zone only if the telephone
has paging set to
Y (Yes).
A zone is any set of Norstar telephones that you want to group
together for paging, regardless of their location. The maximum
number of sets in a page zone is 50.