Nortel Networks P0857846 - Manual (Page 54)

Answering calls / 41
P0857846 Issue 02 Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
You must also turn on Handsfree for a telephone to be able to use
a headset.
Answering calls without lifting the receiver
• Press the line button for the ringing call. (This step is not
necessary if you have a prime line assigned to your telephone.)
• Press © . The telephone’s internal microphone and
speaker are automatically turned on.
Handsfree is not available for an M7100 telephone.
Making calls without lifting the receiver
• If you don’t have a prime line assigned to your telephone, press
a line button.
• Press © . The telephone’s internal microphone and
speaker are automatically turned on.
• Dial your call.
• Speak normally.
Muting Handsfree
You can switch off the telephone microphone so that you can speak
privately to someone in your office while you are on a handsfree call.
• Press © . The microphone is turned off.
You can turn the microphone back on again and continue your
handsfree call.
• Press © .
Changing a regular call to handsfree
• Press © and hang up the receiver.
Tip - Direct your voice toward the telephone. The
closer you are to the telephone, the easier it is for
the microphone to transmit your voice clearly to
your listener.