Nortel Networks P0857846 - Manual (Page 152)

P0857846 Issue 02 Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
General System features
The following features are available for the entire Norstar system.
Set profile
Set profile lets you view but not change the programming settings
for each Norstar set. You can access Set Profile from any M7310 or
M7324 telephone, even while you are on a call.
• Press ƒ••Н‰К .
• Enter the internal number of the telephone whose programming
you want to review.
• Use BACK , SHOW and NEXT to navigate through the settings.
Line profile
Line profile lets you view but not change the programming settings
for each Norstar line. You can access Line Profile from any M7310
or M7324 telephone, even while you are on a call.
• Press ƒ••ÒȈ‰ .
• Enter the number of the line whose programming you want to
review.
• Use BACK , SHOW and NEXT to navigate through the settings.
Pulse or tone dialing
If your external lines use pulse dialing, you can switch temporarily to
tone dialing to communicate with devices such as answering
machines, to access the features that PBX systems may offer, or to
use another Norstar system remotely.
• Press £ while on an active line. Once you hang up, your
telephone returns to pulse dialing.
Disconnect supervision
When Disconnect Supervision is assigned to a line, the Norstar
system monitors it to detect if an external caller hangs up. This