Nortel Networks P0857846 - Manual (Page 23)

10 / Getting started with Norstar
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02
Starting and ending a session
As system coordinator the first steps in making any change to the
Norstar system are always the same.
Ending a session
The system goes ahead with any changes you make to programming
as soon as you move away from a setting, either by using the
navigation buttons or
® .
You can see if the changes you have made to telephone programming
have taken effect by pressing
UPDATE display key. The display will show
you how many telephones have not been updated yet.
Press ƒ
.
Press
••Ç؈ÏÈÌ
It’s the same as pressing
••¤flfl‹››
.
Press ÅΘȈ
( ¤‹fl›fl ).
Press RETRY to re-enter the password if
it is entered wrong.
The display shows the first of the seven
headings available for administration
programming.
ÅΘȈ
is the password, unless the password has been changed.
Check the Programming Record for the most recent password.
Press
®
to end the session.
After a few seconds, the time and date
will reappear on the display.