Nortel Networks P0857846 - Manual (Page 51)

38 / Answering calls
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02
Disconnecting one party
You can disconnect one party from a conference and continue
talking to the other.
On an M7208, M7310 or M7324 telephone:
• Press the line button of the call that you want to disconnect. The
call that you want to keep is automatically put on hold.
• Press ® . The call is disconnected.
• Press the line button of the held call to speak to the remaining
person.
On an M7100 telephone:
• Press ƒ£‹ , to place one caller on hold. Press
˙ again, to put the caller you want to keep on hold.
• Press ® . The call is disconnected.
• Press ˙ to speak to the remaining party.
Independently holding two calls
For all Norstar telephones except the M7100 telephone, you can put
the two people in a conference call on hold independently so that
they cannot talk to each other.
• Press the line button of one person. The other person is
automatically put on hold.
• Press ˙ . The second person is put on hold.
You can re-establish the conference.
• Take one call off hold.
• Press ƒ‹ .
• Take the other call off hold.
Putting a conference on hold
You can put a conference on hold, allowing the other two people to
continue speaking to each other by pressing
˙ .
You can reconnect to the conference by pressing either of the held
line buttons. For the M7100 telephone, press
˙ .