Nortel Networks P0857846 - Manual (Page 134)

Using System features / 121
P0857846 Issue 02 Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
An example of how to turn on a Service manually
You may have Ringing service (your night service) set up to run
according to the Night Schedule. You may decide you want that
ringing arrangement to come into effect only when it is turned on and
off manually.
You will need the programming template found at the front of this
guide. See Getting Started for more information.
1. Press ƒ••¤flfl‹›› .
2. Press ¤‹fl›fl (the default System Coordinator
password).
3. Press ‘ twice.
4. Press ≠ at Services . The display shows Ringing
Serviceˆ .
5. Press ≠ . The display shows Sched:Nightˆ .
6. Press ≠ and use CHANGE to set the Service to Manual .
Night Schedule for Ringing Service will no longer follow the
schedule but can be turned on and off by using the feature code and
selecting Night Ringing. See “Turning Services on and off using
feature codes” on page 121.
Turning Services on and off using feature codes
The master control for services is in programming, see “Turning
Services on and off” on page 119. Day-to-day use of Services is
controlled using the following feature codes.
ƒ°‡⁄ Turns on Ringing service. When used at the
direct-dial telephone, it also activates the
alternate direct-dial telephone (extra-dial
telephone).
ƒ£°‡⁄ Turns off Ringing service.
ƒ°‡¤ Turns on Restriction service.
ƒ£°‡¤ Turns off Restriction service.
ƒ°‡‹ Turns on Routing service.
ƒ£°‡‹ Turns off Routing service.