Nortel Networks P0857846 - Manual (Page 103)

90 / Tracking your incoming calls
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02
If you accidentally erase an item, you can retrieve it.
• Press ˙ or UNDO immediately after accidentally erasing
an item.
• Press ® to exit.
Making a call using Call Log
You may find it helpful to place calls from within your Call Log. The
number stored for each call may vary depending on the type of call.
For example, if the call was placed from a Centrex or PBX system,
the first few numbers may need to be trimmed before you can make
the call. If the number you want to call is long distance, or if you want
to use a line pool, you may need to add numbers.
To place a call
• Display the log item for the call you want to place.
• Display the associated telephone number.
• Press √ or TRIM, once for every digit that you want to
remove.
• Dial any extra digits required.
• Press an external line or line pool button.
• Lift the receiver. (This is not necessary if Handsfree is
programmed at your telephone.) The displayed number is
dialed.
Creating a password to your Call Log
You have the option of accessing your Call Log through a password.
• Press ƒ•°fi . The displays reads New passwrd: .
• Enter your four-digit password. The display reads Repeat New: .
• Re-enter your four-digit password. The display reads
Password changed , which confirms that your password has
been assigned.
To enter Call Log using your password
• Press ƒ°⁄¤ to enter Call Log. If you have
programmed a password, the display reads Password: .
ƒ•°fi