Nortel Networks P0857846 - Manual (Page 31)

18 / Frequently used programming operations
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02
Changing the name of a telephone
Begin the programming session
Change the name of a telephone
Press ƒ .
Press
••¤flfl‹››
.
Press
¤‹fl›fl
Press ≠ .
Enter the internal number (DN) of the
telephone or voice mail extension. In this
example, it’s 221.
If the set has already been given a name, it will appear after DN: on the
display.
Press
≠
then
‘
.
This is the name the display will show if
you don’t change it. Press
CHANGE .
Decide what name you want to give to the telephone number.
Press the telephone’s numeric dial pad
button that has the first letter of the name
until the display shows the letter you want.
Press --> .
Use the dial pad and --> until you have
the entire name.
Press
‘
to use the name you
have entered.
The name can be up to 7 characters long, including spaces.
Press ® to end your session.