Nortel Networks P0857846 - Manual (Page 133)

120 / Using System features
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02
• Manual allows you to turn the service on and off at any time from
a control telephone using a feature code.
• Automatic allows you to use the preassigned stop and start time
for a service. You are still able to start and stop the service by
entering the appropriate feature code at a control telephone. If
you select this setting, you will use the start and stop times
programmed by your installer or customer service
representative.
• Off prevents the service from being activated.
You will need the programming template found at the front of this
guide. See Getting Started for more information.
1. Press ƒ••¤flfl‹›› .
2. Press ¤‹fl›fl (the default System Coordinator
password).
3. Press ‘ twice.
4. Press ≠ at Services .
5. Press ‘ until you see the Service you want to program.
6. Press ≠ and ‘ until you see the schedule you
want to program.
7. Press ≠ and use CHANGE to select the setting that will
work best for your office: Off , Manual or Automatic .
Each schedule can have its own configuration of a Service which
works independently of automatic start and stop times. For example,
there may be a version of Restriction service called Night Schedule
that prevents anyone from making long distance calls. But calling it
Night Schedule does not mean it can only be used with a schedule.
You can turn the Night Schedule for Restriction Service on or off as
needed any time of the day or night. If you decide to run a service
on a schedule, the system will use the start and stop times used for
that schedule.