Nortel Networks P0857846 - Manual (Page 72)

Time savers for making calls / 59
P0857846 Issue 02 Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
Making a speed dial call
You can quickly dial external telephone numbers that have been
programmed onto speed dial codes.
• Press ƒ‚ .
• Enter the appropriate two-digit speed dial code.
Changing and adding System Speed Dials
System Speed Dial codes are numbered from 01 to 70. The system
coordinator assigns numbers to System Speed Dial codes for the
entire system. See “Adding or changing a system speed dial” on
page 15.
Adding or changing User Speed Dial
To add or change a User Speed Dial number on your telephone:
• Press ƒ•› .
• Enter a two-digit code from 71 to 94 that you want to associate
with a telephone number.
• To include a line selection for this number, press the line or
intercom button. To select a line pool, press a programmed line
pool button, or press
∆ and enter a line pool access
code. For the M7100 telephone, you can only select a line pool.
• Enter the number you want to program.
• Press ˙ or OK .
Displays
Tip - There is no difference between using User
Speed Dial and using System Speed Dial. They
differ only in how you program them.
Continue entering the number you wish to
program. You can change the number by
pressing
BKSP or √ . When you
are finished, press
˙
or OK .
ƒ‚
ƒ•›