Nortel Networks P0857846 - Manual (Page 74)

Time savers for making calls / 61
P0857846 Issue 02 Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
Saving a number
• Press ƒfl‡ while you are still on the call.
Saved Number Redial records a maximum of 24 digits.
Dialing a saved number
• Press ƒfl‡ when you are not on a call.
If you have a programmed Saved Number Redial button, you can
use Button Inquiry (
ƒ•‚ ) to check the last number
before you dial it.
Preventing a telephone from using Saved
Number Redial
Saved Number Redial can be restricted at individual telephones.
You will need the programming template found at the front of this
guide. See Getting Started for more information.
• Press ƒ••¤flfl‹›› .
• Press ¤‹fl›fl (the default System Coordinator
password).
• Press ≠ and enter the internal number of the telephone
you wish to program.
• Press ≠ .
• Press ‘ three times. The display shows Restrictions .
• Press ≠ twice.
• Press ‘ twice. The display shows Allow saved no: .
• Press CHANGE to choose Y (Yes) or N (No).
Displays
You have saved a speed dial number that
displays a name rather than the number. The
number will be dialed correctly, but you
cannot see it.
You have tried to save the number of an
incoming call. You can only save numbers
that you have dialed yourself.