Nortel Networks P0857846 - Manual (Page 70)

Time savers for making calls / 57
P0857846 Issue 02 Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
Using Last Number Redial
You can redial the last external number you dialed.
• Press ƒfi .
Last Number Redial records a maximum of 24 digits.
Preventing a telephone from using Last Number
Redial
Last Number Redial can be restricted at individual telephones.
You will need the programming template found at the front of this
guide. See Getting Started for more information.
• Press ƒ••¤flfl‹›› .
• Press ¤‹fl›fl (the default System Coordinator
password).
• Press ≠ and enter the internal number of the telephone
you wish to program.
Press the memory button you want to
program.
Enter the number you want to program onto
the button, then press
˙
.
Enter the number you want to program onto
the button, then press
˙
or OK . You
may include a line or line pool selection in an
autodial sequence by selecting the line
before entering any digits.
The number is stored on the button.
For other displays, see “Common feature displays” on page 149.
Tip - If you have a programmed Last Number
Redial button, you can use Button Inquiry
(
ƒ•‚ ), then press the Last Number
Redial button followed by £ ) to check the last
number before you dial it.
ƒfi