Nortel Networks P0857846 - Manual (Page 89)

76 / Forwarding your calls
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02
6. Press CHANGE to select Y (Yes) or N (No).
Turning the redirect ring for a telephone on or off
You can program a telephone to ring briefly (200 milliseconds) when
a call is redirected on one of its lines.
You will need the programming template found at the front of this
guide. See Getting Started for more information.
1. Press ƒ••¤flfl‹›› .
2. Press ¤‹fl›fl (the default System Coordinator
password).
3. Press ≠ and enter the internal number of the telephone
you wish to program.
4. Press ≠ twice.
5. Press “ three times. The display shows Redirect
ring: .
6. Press CHANGE to select Y (Yes) or N (No).
Displays while redirecting lines
Tip - If a telephone has redirect ring enabled, it
rings briefly for redirected calls on one of its lines
even if another telephone set up the line
redirection.
You selected the intercom button as the
facility to place the call on. Enter a line pool
code or a destination code.
Press
•
or ADD to begin redirection. Press
£
or REMOVE to cancel a previous
redirection.
You have one external line on your
telephone, but you need a second line to
perform line redirection. Redirect your
external line using a line pool as the outgoing
line.