Nortel Networks P0857846 - Manual (Page 26)

P0857846 Issue 02 Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
Frequently used
programming operations
The following sections highlight the most frequently used programming
operations. To consult these or other programming operations, see
either the Table of Contents or the Index.
Changing the time and date on the display
Press
ƒ
.
Press ••°›fl‹ (which is the same
as
••ÊȘ‰
).
Press ¤¤‡›¤ ( ıÅÍÈÇ ) or
¤‹fl›fl ( ÅΘȈ )
The passwords can be changed. See “Using passwords” on page 124 for
more information.
In this example, you are changing the time to 1:30 p.m.
Press CHANGE .
Press the dial pad buttons to enter the hour.
Use two digits for all hours. The clock on the
display will show either one or two digits.
The display will prompt you to choose a.m. or
p.m. Press
CHANGE and OK to select p.m.
Press NEXT .
Press CHANGE .
Press the dial pad buttons to enter the minutes.
If you are only changing the time and not the date, press
®
to end your
session.
In this example, you are changing the date to July 15, 1998.