Patton electronic 3196RC - Manual (Page 82)

Maintenance 82
Model 3196RC T-DAC User Manual 5 • Troubleshooting and maintenance
– To save the displayed data as a text file, use your browser’s Save function (see figure 59 ). Using Netscape
or Internet Explorer, for example.
• Click the File menu.
• Click Save As. A dialog box will appear. Use the dialog to save the data displayed on your browser
(your T-DAC configuration parameters) to a text file.
• Select the folder in which you want to store the file,
• Type a file name.
• Click Save.
Figure 59. Saving the access server flash memory configuration data as a text file
Removing the defective Model 3196RC
1. Remove the replacement Model 3196RC from its shipping container and place it near the chassis in which
the malfunctioning Model 3196RC is located.
Note The Model 3196RC T-DAC blades are hot-swappable, so it is not
necessary to deactivate the rack chassis before replacing a blade.
2. Disconnect and label the following cables from the malfunctioning Model 3196RC:
– The T1/E1 WAN cable (68-pin SCSI connector)
– The iDSL modem cable (RJ-21X connector)
– The RS-232 CONFIG cable
– The 10/100 Ethernet cable