Perle Systems 5500161-40 User Manual
Page 349
RADIUS and TACACS+ 349
RADIUS
16
Login-TCP-Port
Indicates the TCP port with which the user is to be
connected when the Service-Type is set to
1
(Login)
or
3
(Callback-Login).
19
Callback-Number
Specifies the callback phone number. This is the
same implementation as
20
(Callback-ID), but
takes precedence if
20
is set.
20
Callback-ID
Specifies the callback phone number. This is the
same implementation as
19
(Callback-Number), but
19
takes precedence if both are set.
26
Vendor-Specific
Perle’s defined attributes for line access rights and
user level. See
Perle RADIUS Dictionary Example
for an example of this file.
Line Access Rights for port
n
(where
n
is the line
number):
Name: Perle-Line-Access-Port-
n
Type: 100 +
n
Data Type: Integer
Value: Disabled (0), ReadWrite(1), ReadInput(2),
ReadInputWrite (3), ReadOutput (4),
ReadOutputWrite (5), ReadOutputInput (6),
ReadOutputInputWrite (7)
Name: Perle-User-Level
Type: 100
Data Type: Integer
Value: Admin(1), Normal(2), Restricted(3),
Menu(4)
Name: Perle-Clustered-Port-Access
Type: 99
Data Type: Integer
Value: Disabled(0), Enabled(1)
27
Session-Timeout
Maximum number of seconds the user will be
allowed to stay logged on.
28
Idle-Timeout
Use this timer to close a connection because of
inactivity. When the Idle-Timeout expires, the
IOLAN will end the connection. The maximum
value is 4294967 seconds (about 49 days). A value
of 0 (zero) means the Idle-Timeout will not expire,
so the connection is permanently open.
96
Framed-Interface-Id
The remote IPv6 interface identifier for the remote
end of the PPP link.
Type
Name
Description