Perle Systems 5500161-40 - Manual (Page 221)

221
Authentication
SecurID
Overview
If you need to reset the SecurID secret, select Tools , Reset , Reset SecurID Node Secret .
Field Descriptions
Configure the following parameters:
Primary/Master
Host
Replica/Slave Host
UDP Port
Encryption Type
s
Legacy
Accounting
Secondary Host The secondary TACACS+ host that is used for accounting, should the primary
accounting TACACS+ host fail to respond.
Default: None
Accounting Port The port number that TACACS+ listens to for accounting requests.
Default: 49
Accounting Secret The TACACS+ shared secret is used to encrypt/decrypt TACACS+ packets in
communications between two devices. The shared secret may be any
alphanumeric string. Each shared secret must be configured on both client and
server sides.
The first SecurID server that is tried for user authentication.
Default: None
If the first SecurID server does not respond to an authentication request, this is
the next SecurID server that is tried for user authentication.
Default: None
The port number that SecurID listens to for authentication requests.
Default: 5500
The type of encryption that will be used for SecurID server communication.
Data Options: DES, SDI
Default: SDI
If you are running SecurID 3.x or 4.x, you need to run in Legacy Mode . If you
are running SecurID 5.x or above, do not select Legacy Mode .
Default: Disabled