Perle Systems 5500161-40 - Manual (Page 316)

I/O Channels
316 IOLAN SDS/SCS/STS/MDC User’s Guide, Version 4.0
I/O Channels
Overview
When the DeviceManager is connected to an I/O model IOLAN, the I/O Status/Control option is
available. You can view the I/O status and manually control such options as clearing alarms, clearing
minimum/maximum values, resetting the channel(s), and activating/deactivating output.
The following buttons are available:
Reset Channel
Button
Clear Alarm
Button
Clear Latched
Input Button
Clear Minimum
Value Button
Clear Maximum
Value Button
Activate Output
Button
Deactivate Output
Button
Reset All Channels
Button
Refresh Button
Resets the highlighted channel (click on a channel to highlight it).
Clears the alarm. Note that if the condition that tripped the alarm still exists, the
alarm will not look like it’s cleared, but will reflect the appropriate alarm level
severity. Alarm Level 0 means that the alarm has not been triggered.
Clears the latched value.
Clears the minimum value.
Clears the maximum value.
Manually activates the channel output.
Manually deactivates the channel output.
Resets all the channels.
Resets the highlighted channel (click on a channel to highlight it).