Perle Systems 5500161-40 User Manual
Page 303
303
Management
Internet Address
The IP address of the SNMP manager that will send requests to the IOLAN. If
the address is
0.0.0.0
, any SNMP manager with the
Community
name can
access the IOLAN. If you specify a network address, for example
172.16.0.0
, any SNMP manager within the local network with the
Community
name can access the IOLAN.
Field Format: IPv4 or IPv6 address
Permissions
Permits the IOLAN to respond to SNMP requests.
Data Options:
z
None—There is no response to requests from SNMP.
z
Readonly—Responds only to Read requests from SNMP.
z
Readwrite—Responds to both Read and Write requests from SNMP.
Default: None
V3 Read-Write
User
Specified user can view and edit SNMP variables.
V3 Read-Write
Security Level
Select the security level for the Read-Writer user. This must match the
configuration set up in the SNMP manager.
Data Options:
z
None—No security is used.
z
Auth—User authentication is used.
z
Auth/Priv—User authentication and privacy (encryption) settings are
used.
Default: None
V3
V3 Read-Write
Auth Algorithm
Specify the authentication algorithm that will be used for the read-write user.
Data Options: MD5, SHA
Default: MD5
V3 Read-Write
Auth Password
Type in the read-write user’s authentication password.
V3 Read-Write
Confirm Password
Retype the user’s authentication password.
V3 Read-Write
Privacy Algorithm
Specify the read-write user’s privacy algorithm (encryption).
Data Options: DES, AES
Default: DES
V3 Read-Write
Privacy Password
Type in the read-write user’s privacy password.
V3 Read-Write
Confirm Password
Retype the privacy password.
V3 Read-Only User Specified user can only view SNMP variables.
V3 Read-Only
Security Level
Select the security level for the Read-Only user. This must match the
configuration set up in the SNMP manager.
Data Options:
z
None—No security is used.
z
Auth—User authentication is used.
z
Auth/Priv—User authentication and privacy (encryption) settings are
used.
Default: None