Perle Systems 5500161-40 - Manual (Page 313)

IOLAN SDS/SCS/STS/MDC User’s Guide, Version 4.0 313
Controlling the RPS, I/O
Channels, and IPsec
Tunnels
Chapter 14
14
Introduction
The Control section appears when the IOLAN is connected to a Remote Power Switch and/or an I/O
model or you want to control the IPsec tunnel.
RPS Control
Overview
When a Remote Power Switch’s (RPS) console port is attached to the IOLAN’s serial port and the
serial port is configured for the Power Management profile, you will be able to control the RPS’s
power plugs either universally or individually (power on/off the whole RPS or individual plugs).
Field Descriptions
The following buttons are available:
On Button
Off Button
Cycle Button
Reset to Default
State Button
Plug Control Button
Turns all the RPS plugs on.
Turns all the RPS plugs off.
Turns all the RPS plugs off and then on.
Resets all the RPS plugs to the default state as configured in the Power
Management profile settings.
Displays a window that allows you to manage the individual plugs on the RPS.