Input/output signal settings, 7-2. setting the split frame and characters, 7-3. setting the tally displays – Panasonic AV-HS400AE User Manual
Page 78
78
4. Input/output signal settings
4-7-2. Setting the split frame and characters
Set the frame, character brightness and background of the split screens to be displayed on the multi view display.
1
Press the [FUNC] button to light its indicator, and press the [IN/OUT] button to display the IN/OUT menu.
2
Turn [F1] to display the Multi sub menu.
Multi2 Frame
Char
Label
Tally
7/15 LUM 50% LUM 75% On Red+GRN
LUM 0%
LUM 25%
LUM 75%
LUM100%
Off
LUM 0%
LUM 25%
LUM 50%
LUM100%
Off
Off Red
Off
3
Turn [F] to set the split frame brightness and split frame display using the Frame item.
LUM (0%, 25%, 50%, 75%, 100%):
Select one of these settings for the brightness of the split frame (gray scale).
Off: The split frame is not displayed, and tally display is not performed.
4
Turn [F3] to set the character brightness and character display using the Char item.
LUM (0%, 25%, 50%, 75%, 100%):
Select one of these character (gray scale) brightness settings.
The “!” mark appears in front of the name of the material when no signals are input or signals with a
different format are input.
Furthermore, when signals amenable to camera control have been input, the “c” mark is displayed in front
of the name of the material.
(When the “!” mark is displayed, the “c” mark will not be displayed.)
Off: The characters are not displayed. Neither is the character background shown.
5
Turn [F4] to set whether the character background (half-tone) is to be displayed using the Label item.
On: The character background is displayed.
Off: The character background is not displayed.
4-7-3. Setting the tally displays
Set the tally displays to be superimposed onto the split frame of the multi view display.
The red tally indicates material consisting of programme outputs.
The green tally indicates material selected by the preset bus.
On the Multi sub menu, turn [F] to set the tally displays using the Tally item.
Red+GRN: Both the red tally and green tally are displayed.
Red:
Only the red tally is displayed.
Off:
No tally displays are shown.
The red tally is not displayed during FTB operation while the programme images have been completely faded
out to a black screen. At this time, the green tally is displayed for images consisting of programme images.
The red tally signals are output from the tally output connector on the rear panel. Green tally signals are not
supported.