Panasonic AV-HS400AE - Manual (Page 74)

74
4. Input/output signal settings
Input
signals
FS:
On, Off
Mode:
Normal, UC or
D by D (cannot be selected
when the system format is
70p)
Video effects
Output
signals
1
Delay:
90H (7H) or 1F
2  See 4-1-1.
 See 4-11.
Frame synchronizer
DC
(Down-converter)
When the 1080/59.94i format is used:
 For 1080/0i, 70/9.94p and 70/0p, the delay of “Output signal 2 DC (90H)” is further delayed by +1F.

For 1080/0i and 70/0p, 90H indicated below becomes 7H.
OutPhs Input Non-
synchronized
input
Output signal 1
Normal
Output signal 2
DC (90H)
Output signal 2
DC (1F)
System Mode FS Phase
Delay
amount
Phase
Delay
amount
Phase
Delay
amount
Sync signal (Ref): Black burst signal (BBST), tri-level sync signal (TRI), internal reference signal (INT)
1H Normal Off Not possible Ref+1H 1H 1 +90H 1H+90H In-phase
with 1
1H+1F
Normal On Possible Ref+1H Max.
1F+1H 1 +90H Max.
1F+1H
+90H In-phase
with 1
Max.
F+1H
UC/
D by D On
(Forced) Possible
0H
(Example 1) Normal/
UC/
D by D On
(Forced) Possible In-phase
with Ref Max.
1F 1 +90H Max.
1F+90H In-phase
with 1
Max.
F
Sync signal (Ref): Black burst signal (BBAD)
1H Normal Off Not possible Ref–90H
+1H 1H 1 +90H 1H+90H In-phase
with 1
1F+1H
Normal On Possible Ref–90H
+1H Max.
1F–90H
+1H 1 +90H Max.
1F+1H In-phase
with 1
Max.
F–90H
+1H
UC/
D by D On
(Forced) Possible
0H
(Example 2) Normal/
UC/
D by D On
(Forced) Possible Ref–90H Max.
1F–90H 1 +90H
(In-phase
with Ref)
Max.
1F In-phase
with 1
Max.
F–90H
 Conversion based on the HD format applies for 1H.

When DVE effects (SQ, SL, 3D) have been used as the video effects, the output signal is delayed by +1F.

The phase and delay amount for the DVI-I input signals are the same as when UC/D by D is selected since the
frame synchronizer is set to the On mode.

The DVI-I output signals are delayed by +1F.

When images are output to a multi view display, they are delayed by +1F.
When DVI-I output signals are output to a multi view display, the output images are delayed by +F.