Panasonic AV-HS400AE - Manual (Page 72)

7
4. Input/output signal settings
4-6. Adjusting the output signal phase
The phase of the output video signals can be adjusted.
1 Press the [FUNC] button to light its indicator, and press the [IN/OUT] button to display the IN/OUT menu.
2 Turn [F1] to display the OutPhs sub menu.
OutPhs System H-Phase V-Phase
4/15 0H 0 0
1H −1320
|
+1319
−100
|
+100
3 Turn [F], and select 0H or 1H using the System item.
0H: The output video signals are output to the system REF signal with using in-phase.
The frame synchronizer function is ON for all input signals.
1H: The output video signals are output to the system REF signal with 1H delay.
When the frame synchronizer function is ON, the output video signals are output with 1 frame + 1H
delay.
4 Turn [F3] to adjust H phase using the H-Phase item.
H-Phase can be adjusted within a range of –0.H to +0.H.
5 Turn [F4] to adjust V phase using the V-Phase item.
V-Phase can be adjusted within a range of –100H to +100H.
Output video signal phase adjustment
Phase Video format Adjustment range
H-Phase 1080i/9.94i −1100 to 1099
1080/0i −130 to 1319
70/9.94p −8 to 84
70/0p −990 to 989
480/9.94i −49 to 48
76/0i −43 to 431
V-Phase Same for all formats −100 to 100