Panasonic AV-HS400AE - Manual (Page 50)

0
3. Basic operations
3-7. Internal colour signals
3-7-1. Setting the colour background
The colour background to be used by the bus can be set.
Two methods are available: under one method the Hue (hue), Sat (colour saturation) and Lum (luminance) are
set, and under the other the 8 preset colours (white, yellow, cyan, green, magenta, red, blue and black) are called.
The Hue, Sat and Lum of the called colours can also be adjusted.
 Adjusting the colours
1 Press the [FUNC] button to light its indicator, and press the [COLOR] button to display the COLOR menu.
2 Turn [F], [F3] and [F4] to perform the colour adjustments (Hue, Sat and Lum).

Calling the preset colours
Turn [F] to select the preset colour using the Load item, and press the [F] switch.
The Hue, Sat and Lum values are changed to the preset colour values.
 To save the values that were set before calling the preset colour, refer to “3-10. Preset memory”.
CBGD Hue Sat Lum Load↓
1/1 100.0 100.0 100.0 White
0.0
|
359.9
0.0
|
100.0 0.0
|
108.0 Yellow
Cyan
Green
Magenta
Red
Blue
Black