Panasonic AV-HS400AE - Manual (Page 31)

31
3. Basic operations
3-3-2. Selecting the key material
 Selecting the key fill and key source signals
Press the KEY button in the AUX bus selection area, and switch the selection of the key fill signal (indicator
lights in amber) and key source signal (indicator lights in green).
With the indicator of the KEY button lit in amber, press one of the AUX bus crosspoint buttons 1 to 10 to select
the key fill signal.
The indicator of the selected crosspoint button lights in amber. (It will light in red if the selected signal is being
output from the PGM connector.)
Lighting in amber
KEY DSK PinP AUX CLN PVW PGM
AUX SOURCE AUX BUS DELEGATION
AUX
AMB:FILL / GRN:SOURCE
With the indicator of the KEY button lit in green, press one of the AUX bus crosspoint buttons 1 to 10 to select
the key source signal.
The indicator of the selected crosspoint button lights in green. (It will light in red if the selected signal is being
output from the PGM connector.)
Since the luminance and chroma keys are operated as self keys, the key fill signals are used as the key source
signals. When the luminance key or chroma key has been selected as the key type, the key signals will remain
unchanged even when the key source signals are switched.
Lighting in green
KEY DSK PinP AUX CLN PVW PGM
AUX SOURCE AUX BUS DELEGATION
AUX
AMB:FILL / GRN:SOURCE
 Setting the fill matte colour
1 Press the [FUNC] button to light its indicator, and
press the [KEY] button to display the KEY menu.
2 Turn [F1] to display the FillMatt sub menu.
3 Turn [F], [F3] and [F4] to adjust the Hue, Sat and Lum
of the fill matte.
To call the preset colour
Turn [F] to select the preset colour using the Load item,
and press the [F] switch.
The Hue, Sat and Lum values are changed to the preset
colour values.
 To save the values that were set before calling the
preset colour, refer to “3-10. Preset memory”.
FillMatt Hue Sat Lum Load↓
3/9 0.0 0.0 100.0 White
0.0
|
359.9
0.0
|
100.0 0.0
|
108.0 Yellow
Cyan
Green
Magenta
Red
Blue
Black