Panasonic AV-HS400AE - Manual (Page 45)

4
3. Basic operations
3-5-2. Selecting the DSK material
 Selecting the DSK fill signal and DSK source signal
Press the [DSK] button in the AUX bus selection area to switch the selection of the DSK fill signal (indicator
lights in amber) and DSK source signal (indicator lights in green).
While the indicator of the [DSK] button is lit in amber,
press one of the AUX bus crosspoint buttons 1 to 10
to select the DSK fill signal.
The indicator of the selected AUX bus crosspoint
button lights in amber. (It lights in red if the selected
signal is being output from the PGM connector.)
Lighting in amber
KEY DSK PinP AUX CLN PVW PGM
AUX SOURCE AUX BUS DELEGATION
AUX
AMB:FILL / GRN:SOURCE
While the indicator of the [DSK] button is lit in green,
press one of the AUX bus crosspoint buttons 1 to 10
to select the DSK source signal.
The indicator of the selected AUX bus crosspoint
button lights in green. (It lights in red if the selected
signal is being output from the PGM connector.)
Since the luminance key is operated as a self key,
the key fill signals are used as the key source
signals. When the luminance key has been selected
as the downstream key type, the key signals will
remain unchanged even when the key source
signals are switched.
Lighting in green
KEY DSK PinP AUX CLN PVW PGM
AUX SOURCE AUX BUS DELEGATION
AUX
AMB:FILL / GRN:SOURCE

Setting the fill matte colour
1 On the KEY menu, turn [F1] to display the FillMatt sub
menu.
2 Turn [F], [F3] and [F4] to adjust the Hue, Sat and Lum
of the fill matte.
To call the preset colour
Turn [F] to select the preset colour using the Load item,
and press the [F] switch.
The Hue, Sat and Lum values are changed to the preset
colour values.
 To save the values that were set before calling the
preset colour, refer to “3-10. Preset memory”.
FillMatt Hue Sat Lum Load↓
3/7 0.0 0.0 100.0 White
0.0
|
359.9
0.0
|
100.0 0.0
|
108.0 Yellow
Cyan
Green
Magenta
Red
Blue
Black