Panasonic AV-HS400AE - Manual (Page 113)

113
Menu
Sub menu Parameter 1 Parameter 2 Parameter 3 Parameter 4
Turn F1 to select. Turn F to select. Turn F3 to select. Turn F4 to select. Turn F to select.
IN/OUT DVIOut Parameter Signal Mode
↓
Size
↓
Scale
↓
1/1 Setting range OUT3, OUT  Dig, Ana  Auto, XGA,
WXGA, SXGA,
WSXGA+, UXGA,
WUXGA
 Fit-V, Fit-H, Full,
:4 (“:4” can be
selected when
SXGA has been
selected as the
Size item setting.)
Default value — Dig Auto Fit-V
UpConvt Parameter Signal Scale
↓
MovDet
↓
Sharp
↓
13/1 Setting range IN to 8  SQ, EC, LB  1 to  1 to
Default value — SQ 3 3
CmpsitIn Parameter Signal Chroma Ped Hue
14/1 Setting range IN to 8 −8 to +7 −100 to +100 −30 to +30
(Enabled when the
system format is
set to 1080/9.94i,
70/9.94p and
480/9.94i.)
Default value — 0 0 0
DownConv Parameter Signal Scale
↓
Delay
↓
Sharp
↓
1/1 Setting range OUT3 to 6 
SQ, EC, LB

90H (7H), 1F

1 to
Default value — SQ 90H 1
MEMORY PSMEM Parameter Mode NO.Sel XPT Exec
↓
1/4 Setting range Store, Recall,
Clear 
1 to 10 Disable, Enable
Default value — — — —
FMEM Parameter Signal Store Review Exec
↓
/4 Setting range AUX FMEM1, FMEM On, Off
Default value — — Off —
SDCard Parameter Mode
↓
Select SaveFile Exec
↓
3/4 Setting range  Load, Save, Init,
Delete, No Card
FMEM1, FMEM,
System HS07031100000
Default value — — —
CardInfo Parameter Images FreeSpace GetInf
↓
4/4 Setting range MB/ MB
Default value
XPT XPTStats Display only
SIG:B 1 2 3 4 5 6 7 8 G
XPT:1 2 3 4 5 6 7 8 9 10
1/3
XPTAsign Parameter XPT Signal
/3 Setting range 1 to 10 IN1 to 8, Black,
CBGD, CBAR,
FMEM1, FMEM,
None
Default value — —
XPTSwch Parameter Timing
3/3 Setting range Any, Field1, Field
Default value Any
8. Setting menu table