Panasonic AV-HS400AE - Manual (Page 110)

110
Menu
Sub menu Parameter 1 Parameter 2 Parameter 3 Parameter 4
Turn F1 to select. Turn F to select. Turn F3 to select. Turn F4 to select. Turn F to select.
KEY KEY Parameter Type LumKey Fill PVW
1/9 Setting range Lum, Linear,
Chroma, Full ChrmOn, ChrmOff Bus, Matte Auto, On, Off
Default value Linear ChrmOff Bus Auto
Adjust Parameter Clip Gain Density Invert
/9 Setting range 0.0 to 108.0 0.0 to 00.0 0.0 to 100.0 On, Off
Default value 0.0 100.0 100.0 Off
FillMatt Parameter Hue Sat Lum Load
↓
3/9 Setting range 0.0 to 39.9 0.0 to 100.0 0.0 to 108.0 White, Yellow,
Cyan, Green,
Magenta, Red,
Blue, Black
Default value 0.0 0.0 100.0 White
Edge Parameter Type Width Direc
4/9 Setting range Off, Border, Drop,
Shadow, Outline 0 to 4 0, 4, 90, 13,
180, , 70, 31
Default value Off 0
EdgeCol Parameter Hue Sat Lum Load
↓
/9 Setting range 0.0 to 39.9 0.0 to 100.0 0.0 to 108.0 White, Yellow,
Cyan, Green,
Magenta, Red,
Blue, Black
Default value 0.0 0.0 0.0 Black
Mask Parameter Mask Invert
6/9 Setting range Manual, Off, 4:3 On, Off
Default value Off Off
MaskAdj Parameter Left Top Bottom Right
7/9 Setting range −0.00 to +0.00 −0.00 to +0.00 −0.00 to +0.00 −0.00 to +0.00
Default value −.00 +.00 −.00 +.00
Trans Parameter OutPatt
8/9 Setting range Nor, Rev
Default value Nor
FlyKEY Parameter X-Pos Y-Pos Size
9/9 Setting range −100.00 to 100.00 −100.00 to 100.00 0.0 to 400.0
Default value 0.00 0.00 100.0
CHR KEY Auto Parameter Marker Aspect Sample
↓
1/3 Setting range On, Off −0.00 to +0.00 Start
Default value Off 0.0
Adjust1 Parameter Hue Sat Lum Y-Infl
/3 Setting range 0.0 to 39.9 0.0 to 100.0 0.0 to 108.0 0.0 to 100.0
Default value 34.0 100.0 7.0 0.0
Adjust2 Parameter Hue-Rad Sat-Rad Soft Cancel
3/3 Setting range 0.0 to 100.0 0.0 to 100.0 0.0 to 100.0 0.0 to 100.0
Default value 100.0 0.0 0.0 0.0
FREEZE Status Display only FRZ:         
XPT:1 2 3 4 5 6 7 8 9 10
1/
Freeze Parameter Signal Select Freeze
↓
/ Setting range IN1 to 8 Frame, Field Toggling between
On and Off
Default value — Frame Off
8. Setting menu table