Psion Teklogix 9160 G2 - Manual (Page 63)

Psion Teklogix 9160 G2 Wireless Gateway User Manual 41
Chapter 4: Quick Steps For Setup And Launch
Log On To The Administration Web Pages
4.4 Log On To The Administration Web Pages
When you go to the IP address of the 9160 G2 Wireless Gateway Administration
Web pages, you are prompted for a user name and password.
The defaults for user name and password are as follows.
Enter the user name and password and click OK.
4.4.1 Viewing Basic Settings For Access Points
When you first log in, the Basic Settings page for 9160 G2 Wireless Gateway
administration is displayed. These are global settings for all access points that are
members of the cluster and, if automatic configuration is specified, for any new
access points that are added later.
Field Default Setting
User name admin
Password admin
The user name is read-only. It cannot be modified.
Table 4.3 Username And Password