Psion Teklogix 9160 G2 - Manual (Page 163)

Psion Teklogix 9160 G2 Wireless Gateway User Manual 141
Chapter 13: Setting the Wireless Interface
Navigating To Wireless Settings
Wireless Settings describes aspects of the local area network (LAN) related specifi-
cally to the radio device in the access point (802.11 Mode and Channel) and to the
network interface to the access point (MAC address for access point and Wireless
Network name, also known as SSID).
The following sections describe how to configure the “Wireless” address and related
settings on the 9160 G2 Wireless Gateway.
13.1 Navigating To Wireless Settings
To set the wireless address for an access point, navigate to the Manage > 802.11
Basic Settings tab which will open the Wireless Settings page, and update the fields
as described below.
Note: The following figure shows the Wireless Settings page for a two-radio AP.
The Administration Web page for the single-radio AP will look slightly
different.