Psion Teklogix 9160 G2 - Manual (Page 291)

Psion Teklogix 9160 G2 Wireless Gateway User Manual B-3
Appendix B: Port Pinouts And Cable Diagrams
RJ-45 Connector Pinouts (10BaseT/100BaseT Ethernet)
B.3 RJ-45 Connector Pinouts (10BaseT/100BaseT Ethernet)
Note: Usually, a straight-through connection is needed to connect Twisted-Pair
(10BaseT or 100BaseT) to the hub.
9160 G2 using AC
9160 G2 using Power over Ether-
net*
Contact Signal Contact Signal
1 TD+ 1 TD+
2 TD– 2 TD–
3 RD+ 3 RD+
4 Not used 4
5 Not used 5
6 RD– 6 RD–
7 Not used 7
8 Not used 8
* The 9160 G2 can also accept 48 VDC power bias
on the data line pairs (1,2) and (3,6) from such sys-
tems providing power over Ethernet.