Psion Teklogix 9160 G2 User Manual
Page 173
Psion Teklogix 9160 G2 Wireless Gateway User Manual
151
Chapter 14: Setting up Guest Access
Configuring A Guest Network On A Virtual LAN
1.
Use only one wired connection from the network port on the access
point to the LAN. (Make sure this port is configured to handle VLAN
tagged packets.)
2.
Configure Ethernet (wired) Settings for Internal and Guest networks on
VLANs as described in the sections in Chapter 12: “The Ethernet
(Wired) Interface”.
(Start by enabling Guest Access and choosing “For Internal and Guest
access, use two: VLANs” as described in “Specifying A Virtual Guest
Network” on page 135.)
3.
Provide the radio interface settings and network names (SSIDs) for
both Internal and Guest networks as described in Chapter 13: “Setting
the Wireless Interface”.
4.
Configure the guest splash screen as described in “Configuring The
Welcome Screen (Captive Portal)” on page 152.