Psion Teklogix 9160 G2 - Manual (Page 275)

Psion Teklogix 9160 G2 Wireless Gateway User Manual 253
Chapter 24: Backing Up & Restoring Configuration
Navigating To The AP’s Configuration Settings
You can save a copy of the current settings on the 9160 G2 Wireless Gateway to a
backup configuration file. The backup file can be used at a later date to restore the
access point to the previously saved configuration.
24.1 Navigating To The AP’s Configuration Settings
To manage the configuration of an access point, navigate to the Maintenance >
Configuration tab and use the interface as described below.
24.2 Resetting Factory Default Configuration
If you are experiencing problems with the 9160 G2 Wireless Gateway and have
tried all other troubleshooting measures, use the Reset Configuration function. This
will restore factory defaults and clear all settings, including settings such as a new
password or wireless settings.
1. Click the Maintenance > Configuration tab.
2. Click the Reset button.
Factory defaults are restored.
Note: Keep in mind that if you do reset the configuration from this page, you are
doing so for this access point only; not for other access points in the cluster.
For information on the factory default settings, see “Default Settings For
The 9160 G2 Wireless Gateway” on page 27.