Psion Teklogix 9160 G2 User Manual
Page 317
Psion Teklogix 9160 G2 Wireless Gateway User Manual
C-25
Appendix C: Security Settings On Wireless Clients And RADIUS Server Setup
WPA/WPA2 Enterprise (RADIUS) Client Using EAP-TLS Certificate
2.
Configure the 9160 G2 Wireless Gateway to use your RADIUS server
(by providing the RADIUS server IP address as part of the
“WPA/WPA2 Enterprise [RADIUS]” security mode settings).
3.
Configure wireless clients to use WPA security and “Smart Card or
other Certificate” as described in this section.
4.
Obtain a certificate for this client as described in “Obtaining A TLS-
EAP Certificate For A Client” on page C-34.
If you configured the 9160 G2 Wireless Gateway to use WPA/WPA2 Enterprise
(RADIUS) security mode with an external RADIUS server . . .