Pitney Bowes J693 - Manual (Page 71)

J693 61
5.6.2 Updating from the Download Mode
Required Update Procedure for Application Version 2.08 or earlier*
Step Displayed Message Operator Action Comment(s)
1. #L"RQ
QSOQZ SPRRPQQ
Press and hold the
PAUSE and TEST
keys while turning
‘On’ the printer to
enter the Download
Mode. The Boot Loader version
is displayed.
; ;
Note: This information
will vary with the printer
model and Boot Loader
version.
2. " "
"
Using the DOS
copy command,
copy the filename
to the printer (see
Step 2 in Section
5.6.1). The printer is ready to
accept the new application
version.
; ;
Note: The parallel port
(LPT1) must be used to
write to the printer.
3. " "
" "
No action required. The printer is receiving
the new image (program).
4. "
"
" "
No action required. The program has been
received and verified; now
Flash memory is cleared
of the previous
application.
5.
"
" "
No action required. The new program is being
written into Flash memory.
Upon completion, the
printer will automatically
reset, starting the new
application; however,
before continuing, the
printer must be re-
calibrated; see Section 5.2.
*This can also be used as an alternate download method for all other version levels.