Pitney Bowes J693 User Manual

Page 36

J693

System Settings (continued)

SET FACTORY DEFAULTS

Parameters in this menu listing with the ‘

’

symbol are the designated defaults.

SET FACTORY
DEFAULTS

Overwrite the current settings with the
factory default settings.

;

Note: The printer will reset

automatically. All menu settings will be
restored except CUSTOM ADJUSTMENTS
and the media and ribbon calibration
parameters.

FORMAT ATTRIBUTES

Affects the manner in which overlapping
text and graphics are treated as the label is
printed. Consult the Programmer’s Manual
for details.

TRANSPARENT

Intersecting text strings, images, and bar
codes will not be printed. (An odd number
of overlapping objects will print.)

XOR

Intersecting text strings, images, and bar
codes print on top of one another.

OPAQUE

Interacting text strings, images, and bar
codes are obliterated by those formatted
last. Each character cell is treated as
opaque.

IMAGING MODE

♦

Instructs the printer whether it can pre-
image the label format.

;

Note: This selection can affect the

accuracy of time-stamped labels and label
throughput.

MULTIPLE LABEL

The printer images multiple labels as
memory permits, achieving the fastest
throughput; however if time-stamping, the
time will reflect the moment the label is
imaged rather than when actually printed.

SINGLE LABEL

The printer images the next label only after
the previous label has been successfully
printed; this single processing provides
more accurate time-stamps with a minor
cost to label throughput.

(Continued next page)