Pitney Bowes J693 - Manual (Page 39)

J693 29
Communications (continued)
HOST SETTINGS Settings which affect all communications
with a host.
HOST TIMEOUT
—
10 SEC (1-60)
The number of seconds a communications
port must be idle before the printer may
process data from a different port. This
value is also used to “timeout” an image /
label download.
CONTROL CODES
♦
Allows the operator to change the prefix
of the commands interpreted by the
printer.
a
STANDARD CODES Hex 01 = SOH command; Hex 02 = STX
command; Hex 0D = CR
ALTERNATE CODES Hex 5E = SOH command; Hex 7E = STX
command; Hex 0D = CR
ALTERNATE CODES 2 Hex 5E = SOH command; Hex 7E = STX
command; Hex 7C = CR
ALTERNATE CODES 3 Hex 5E = SOH command; Hex 23 = STX
command; Hex 0D = CR
FEEDBACK MODE Returns a Hex 1E, [RS], after each label
successfully prints, and a Hex 1F, [US],
after each batch of labels is printed.
ENABLED Feedback characters are sent to the host.
a
DISABLED No feedback characters are sent.