Pitney Bowes J693 - Manual (Page 33)

J693 23
Printer Options (continued)
GPIO PORT The physical presence of the optional GPIO
port must be detected to show the selections in
the menu system.
GPIO Instructs the printer to update the output
signals and to wait for the Start of Print Signal
to print a label.
ENABLED Yes
a
DISABLED No
END OF PRINT Defines the operation of the printer’s End of
Print signal as sent to the applicator. This
signal indicates that the printer has completed
the print cycle.
LOW STATUS A steady Low (0 VDC) during the print cycle.
HIGH STATUS A steady High (5 VDC) during the print cycle.
LOW PULSE A Low Pulse (0 VDC for 30 ms) at the end of
print.
HIGH PULSE A High Pulse (5 VDC for 30 ms) at the end of
print.
DISABLED No indication.