Powerware 5140 - Manual (Page 47)

Front Panel Menus
39 Powerware ® 5140 User’s Guide
:
www.powerware.com
Display Test
This feature allows you to test all pixels in the LCD panel. “Powerware
Display Test” scrolls across the panel. Use the
to exit the test mode.
System Setup
Select the System Setup option to enter the System Setup Menu. This
menu is password-protected and prompts you for the System Setup
password.
Use ? and + to scroll through the character values. Use * and to
move to the next character in the password. To enter the complete
password, press
. The password must be six characters long.
After entering a valid password, the System Setup Menu appears.
NOTE The default password is PRWARE. It is recommended to change the default
password to ensure security. Contact your service representative if you have misplaced
your password.
The System Setup Menu contains the following options:
: Set HW (Hardware) Configuration
: Set Language
: Set Alarm Horn
: Set Password
: Set Sync Range
: Comm (Communications) Setup
: Set Voltage
: Set Site Fault
: Set Sleep Mode
Use
? and + to display the System Setup options. Press to enter one
of the submenus.